2021
  • Westphal, E.; Seitz, H.: A Machine Learning Method for Defect Detection and Visualization in Selective Laser Sintering based on Convolutional Neural Networks. Additive Manufacturing, 41 (2021), 101965 DOI: 10.1016/j.addma.2021.101965
  • Riaz, A.; Witte, K.; Bodnar, W.; Seitz, H.; Schell, N.; Springer, A. Burkel, E.: Tunable pseudo-piezoelectric effect in doped calcium titanate for bone tissue engineering. Materials, 14 (2021), 1495 DOI: 10.3390/ma14061495
  • Distler, T.; Polley, C.; Shi, F.; Schneidereit, D.; Ashton, M.D.; Friedrich, O.; Kolb, J.F.; Hardy, J.G.; Detsch, R.; Seitz, H.; Boccaccini, A.R.: Electrically Conductive and 3D-printable Oxidized Alginate-Gelatin Polypyrrole:PSS Hydrogels for Tissue Engineering. Advanced Healthcare Materials, (2021), 2001876 DOI: 10.1002/adhm.202001876
  • Wieland, F.; Krueger, S.; Moosmann, J.; Distler, T.; Weizel, A.; Boccaccini, A.R.; Seitz, H.; Jonitz-Heincke, A.; Bader, R.: Propagation-based phase contrast computed tomography as a suitable tool for the characterization of spatial three-dimensional cell distribution in biomaterials. Advanced Engineering Materials, (2021) DOI: 10.1002/adem.202001188
  • Radlof, W.; Polley, C.; Seitz, H.; Sander, M.: Influence of structure-determining parameters on the mechanical properties and damage behavior of electron beam melted lattice structures under quasi-static and fatigue compression loading. Materials Letters, 289 (2021), 129380 DOI: 10.1016/j.matlet.2021.129380
  • Krueger, S.; Riess, A.; Jonitz-Heincke, A.; Weizel, A.; Seyfarth, A.; Seitz, H.; Bader, R.: Establishment of a New Device for Electrical Stimulation of Non-Degenerative Cartilage Cells In Vitro. International Journal of Molecular Science, 22 (2021), 394 DOI: 10.3390/ijms22010394
2020
  • Weizel, A.; Distler, T.; Schneidereit, D.; Friedrich, O.; Bräuer, L.; Paulsen, F.; Detsch, R.; Boccaccini, A.R.; Budday, S.; Seitz, H.: Complex mechanical behavior of human articular cartilage and hydrogels for cartilage repair. Acta Biomaterialia, 118 (2020), 113-128 DOI: 10.1016/j.actbio.2020.10.025
  • Schnell, G.; Polley, C.; Bartling, S.; Seitz, H.: Effect of Chemical Solvents on Change in Wetting Behavior Over Time on Femtosecond Laser Structured Ti6Al4V Surfaces. Nanomaterials, 10 (2020), 1241 DOI: 10.3390/nano10061241
  • Polley, C.; Distler, T.; Detsch, R.; Lund, H.; Springer, A.; Boccaccini, A.R.; Seitz, H.: 3D Printing of Piezoelectric Barium Titanate-Hydroxyapatite Scaffolds with Interconnected Porosity for Bone Tissue Engineering. Materials, 13 (2020), 1773 DOI: 10.3390/ma13071773
  • Distler, T.; Fournier, N.; Grünewald, A.; Polley, C.; Seitz, H.; Detsch, R.; Boccaccini, A.R.: Polymer-Bioactive Glass Composite Filaments for 3D Scaffold Manufacturing by Fused Deposition Modelling: Fabrication and Characterization. Frontiers in Bioengineering and Biotechnology Biomaterials, 8 (2020), 552 DOI: 10.3389/fbioe.2020.00552
  • Drobek, C.; Waletzko, J.; Weißmann, V.; Seehafer, S.; Mau, R.; Jonitz-Heincke, A.; Bader, R.; Schwerdt, D.; Dau, M.; Frerich, B.; Seitz, H.: Initial study on removing cellular residues from hydrostatic high-pressure treated allogeneic tissue using ultrasound. Current Directions in Biomedical Engineering 6 (2020), 176-179 DOI: 10.1515/cdbme-2020-3045
  • Rekowska, N.; Konasch, J.; Riess, A.; Mau, R.; Eickner, T., Seitz, H.; Grabow, N., Teske, M.: PEGDA drug delivery scaffolds prepared with UV curing process. Current Directions in Biomedical Engineering, 6 (2020), 193-195 DOI: 10.1515/cdbme-2020-3049
  • Mau, R.; Reske, T.; Eickner, T.; Grabow, N.; Seitz, H.: DLP 3D printing of Dexamethasoneincorporated PEGDA-based photopolymers: compressive properties and drug release. Current Directions in Biomedical Engineering, 6 (2020), 406-409 DOI: 10.1515/cdbme-2020-3105
  • Polley, C.; Kussauer, S.; David, R.; Barkow, P.; Mau, R.; Seitz, H.: Printing of vessels for small functional tissues – a preliminary study. Current Directions in Biomedical Engineering, 6 (2020), 469-472 DOI: 10.1515/cdbme-2020-3121
  • Drescher, P.; Oldorf, P.; Peters, R.; Seitz, H.: Microstructured ceramic and metallic implant surfaces and their impact on the viscosity of a synovia fluid substitute. Current Directions in Biomedical Engineering, 6 (2020), 620-623 DOI: 10.1515/cdbme-2020-3158
  • Hutsaylyuk, V.; Lytvynenko, I.; Maruschak, P.; Dzyura, V.; Schnell, G.; Seitz, H.: A New Method for Modeling the Cyclic Structure of the Surface Microrelief of Titanium Alloy Ti6Al4V After Processing with Femtosecond Pulses. Materials, 13 (2020), 4983 DOI: 10.3390/ma13214983
  • Barillas, L.; Makhneva, E.; Weltmann, K.-D.; Seitz, H.; Fricke, K.: Plasma Printing – Direct local patterning with functional polymer coatings for biosensing and microfluidics applications. Microelectronic Engineering, (2020), 111431 DOI: 10.1016/j.mee.2020.111431
  • Drescher, P.; Oldorf, P.; Dreier, T.; Schnell, G.; Peters, R.; Seit, H.: Ring-Shaped Surface Microstructures for Improved Lubrication Performance of Joint Prostheses. Lubricants, 8 (2020), 45 DOI: 10.3390/lubricants8040045
  • Schnell, G.; Duenow, U.; Seitz, H.: Effect of laser pulse overlap and scanning line 2 overlap on femtosecond laser structured Ti6Al4V 3 surfaces. Materials, 13 (2020), 969 DOI: 10.3390/ma13040969
  • Vaezi, M.; Drescher, P.; Seitz, H.: Beamless Metal Additive Manufacturing. Materials, 13 (2020), 922 DOI: 10.3390/ma13040922
  • Probst, F.A.; Fliefel, R.; Burian, E.; Probst, M.; Eddicks, M.; Cornelsen, M.; Riedl, C.; Seitz, H.; Aszodi, A.; Schieker, M.; Otto, S.: Bone regeneration of minipig mandibular defect by adipose derived mesenchymal stem cells (ADSCs) seeded tri-calcium phosphate-poly(D,L-lactide-co-glycolide) (TCP-PLGA) scaffolds: An In-vivo Study. Scientific Reports, 10 (2020), 2062 DOI: 10.1038/s41598-020-59038-8
  • Charbonnier, B.; Maillard, S.; Sayed, O.; Baradaran, A.; Mangat, H.; Dallison, B.; Zhang, Z.; Zhang, Y.L.; Hussain, S.N.A.; Mayaki, D.; Seitz, H.; Harvey, E.J.; Gilardino, M.; Gbureck, U.; Makhoul, N.; Barralet, J.: Biomaterial-Induction of a Transplantable Angiosome. Advanced Functional Materials, 30 (2020), 1905115 DOI: 10.1002/adfm.201905115
2019
  • Konasch, J.; Riess, A.; Mau, R.; Teske, M.; Rekowska, N.; Eickner, T.; Grabow, N.; Seitz, H.: A Novel Hybrid Additive Manufacturing Process for Drug Delivery Systems with Locally Incorporated Drug Depots. Pharmaceutics, 11 (2019), 661 DOI: 10.3390/pharmaceutics11120661
  • Mau, R.; Nazir, J.; John, S.; Seitz, H.: Preliminary Study on 3D printing of PEGDA Hydrogels for Frontal Sinus Implants using Digital Light Processing (DLP). Current Directions in Biomedical Engineering. Current Directions in Biomedical Engineering, 5 (2019), 249-252 DOI: 10.1515/cdbme-2019-0063
  • Drescher, P.; Oldorf, P.; Dreier, T.; Peters, R.; Seitz, H.: Modification of joint prosthesis surfaces by ultrashort pulse laser treatment for improved joint lubrication. Current Directions in Biomedical Engineering. Current Directions in Biomedical Engineering, 5 (2019), 57-60 DOI: 10.1515/cdbme-2019-0015
  • Rekowska, N.; Arbeiter, D.; Konasch, J.; Riess, A.; Mau, R.; Eickner, T.; Seitz, H.; Grabow, N.; Teske, M.: Thermomechanical properties of PEGDA in combination with different photo-curable comonomers. Current Directions in Biomedical Engineering, 5 (2019), 319-322 DOI: 10.1515/cdbme-2019-0080
  • Schnell, G.; Jagow, C.; Springer, A.; Frank, M.; Seitz, H.: Time-Dependent Anisotropic Wetting Behavior of Deterministic Structures of Different Strut Widths on Ti6Al4V. Metals, 9 (2019), 938 DOI: 10.3390/met9090938
  • Maizza, G.; Caporale, A.; Polley, C.; Seitz, H.: Micro-Macro Relationship between Microstructure, Porosity, Mechanical Properties, and Build Mode Parameters of a Selective-Electron-Beam-Melted Ti-6Al-4V Alloy. Metals, 9 (2019), 786 DOI: 10.3390/met9070786
  • Schnell, G.; Staehlke, S.; Duenow, U.; Nebe, J.B.; Seitz, H.: Femtosecond Laser Nano/Micro Textured Ti6Al4V Surfaces—Effect on Wetting and MG-63 Cell Adhesion. Materials, 12 (2019), 2210 DOI: 10.3390/ma12132210
2018
  • Mau, R.; Paasche, G.; Lenarz, T.; Seitz, H.: Inkjet printing for localized coating and functionalization of medical devices. Current Directions in Biomedical Engineering, 4 (2018), 233-236 DOI: 10.1515/cdbme-2018-0057
  • Konasch, J.; Riess, A.; Teske, M.; Rekowska, N.; Mau, R.; Eickner, T.; Grabow, N.; Seitz, H.: Novel 3D printing concept for the fabrication of time-controlled drug delivery systems. Current Directions in Biomedical Engineering, 4 (2018), 141-144 DOI: 10.1515/cdbme-2018-0035
  • Rekowska, N.; Arbeiter, D.; Konasch, J.; Riess, A.; Mau, R.; Eickner, T.; Seitz, H.; Grabow, N.; Teske, M.: Thermomechanical properties of PEGDA and its co-polymers. Current Directions in Biomedical Engineering, 4 (2018), 669-672 DOI: 10.1515/cdbme-2018-0161
  • Weißmann, V.; Drescher, P.; Seitz, H.; Hansmann, H.; Bader, R.; Seyfarth, A.; Klinder, A.; Jonitz-Heincke, A.: Effect of build orientation on surface morphology and cell activity of additively manufactured Ti6Al4V specimens. Materials, 11(2018), 915 DOI: 10.3390/ma11060915
  • Cornelsen, M.; Deutsch, C.; Seitz, H.: Influence of Processing Parameters on the Roughness of Electrolytic Plasma Polished Pipe Inner Surfaces. Metals, 8 (2018), 330 DOI: 10.3390/met8050330
  • Schult, M.; Drobek, C.; Seitz, H.: Silicone-based molding technique for optical flow analysis in transparent models of fluidic components. Applied Science, 8 (2018), 512 DOI: 10.3390/app8040512
  • Lieberwirth, C.; Sarhan, M.; Seitz, H.: Mechanical Properties of Stainless Steel Structures Fabricated by Composite Extrusion Modelling. Metals, 8 (2018), 84 DOI:10.3390/met8010084
  • Cornelsen, M.; Deutsch, C.; Seitz, H.: Electrolytic Plasma Polishing of Pipe Inner Surfaces. Metals, 8 (2018), 12 DOI:10.3390/met8010012
2017
  • Cornelsen, M.; Probst, F.; Schwarz, C.; Burian, E.; Tröltsch, M.; Otto, S.; Schieker, M.; Seitz, H.: Mechanical and biological effects of infiltration with biopolymers on 3D printed tricalciumphosphate scaffolds for the reconstruction of critical size defects. Dental Materials Journal, 36 (2017), 553–559 DOI: 10.4012/dmj.2016-306
  • Polley, C.; Mau, R.; Lieberwirth, C.; Stenzel, J.; Vollmar, B.; Seitz, H.: Bioprinting of three dimensional tumor models: a preliminary study using a low cost 3D printer. Current Directions in Biomedical Engineering, 3 (2017), 135-138 DOI:10.1515/cdbme-2017-0028
  • Dethloff, M.; Dangers, M.; Seitz, H.: Numerical flow simulation methods and additive manufacturing methods for the development of a flow optimised design of a novel point-of-care diagnostic device. Current Directions in Biomedical Engineering, 3 (2017), 619-622 DOI:10.1515/cdbme-2017-0129
  • Lieberwirth, C.; Harder, A.; Seitz, H.: Extrusion based additive manufacturing of metals parts. Journal of Mechanics Engineering and Automation, 7 (2017) 79-83 DOI: 10.17265/2159-5275/2017.02.004
  • Weißmann, V.; Drescher, P.; Bader, R.; Seitz, H.; Hansmann, H.; Laufer, N.: Comparison of single Ti6Al4V struts made using selective laser melting and electron beam melting subject to part orientation. Metals, 7 (2017), 91 DOI:10.3390/met7030091
  • Scheef, L.; Nordmeyer-Massner, J.A.; Smith-Collins, A.P.R.; Müller, N.; Stegmann-Woessner, G.; Jankowski, J.; Gieseke, J.; Born, M.; Seitz, H.; Bartmann, P.; Schild, H.H.; Pruessmann, K.P.; Heep, A.; Boecker, H.: Functional Laterality of Task-Evoked Activation in Sensorimotor Cortex of Preterm Infants: An Optimized 3 T fMRI Study Employing a Customized Neonatal Head Coil. PLoS ONE, 12 (2017), e0169392 DOI:10.1371/journal.pone.0169392
  • Beck-Broichsitter, B.E.; Becker, S.T.; Seitz, H.; Wiltfang, J.; Warnke, P.H.: Endocultivation: continuous application of rhBMP-2 via mini-osmotic pumps to induce bone formation at extraskeletal sites. International Journal of Oral and Maxillofacial Surgery, 5 (2017), 655-661 DOI: 10.1016/j.ijom.2017.01.010
2016
  • Heller, M.; Bauer, H.-K.; Goetze, E.; Gielisch, M.; Ozbolat, I.T.; Moncal, K.K.; Rizk, E.; Seitz, H.; Gelinsky, M.; Schröder, H.C.; Wang, X.H.; Müller, W.E.G.; Al-Nawas, B.: Materials and Scaffolds in Medical 3D Printing and Bioprinting in the Context of Bone Regeneration. International Journal of Computerized Dentistry, 19 (2016), 301-321
  • Drescher, P.; Sarhan, M.; Seitz, H.: Investigation of sintering parameters on titanium powder for electron beam melting processing optimization. Materials, 9 (2016), 974 DOI:10.3390/ma9120974
  • Schult, M.; Buckow, E.; Seitz, H.: Experimental studies on 3D printing of barium titanate ceramics for medical applications. Current Directions in Biomedical Engineering, 2 (2016), 95–99 DOI: 10.1515/cdbme-2016-0024
  • Mau, R.; Oldorf, P.; Peters, R.; Seitz, H.: Adjusting inkjet printhead parameters to deposit drugs into micro-sized reservoirs. Current Directions in Biomedical Engineering, 2 (2016), 387-390 DOI: 10.1515/cdbme-2016-0086
  • Pollack, T.; Seitz, H.: Influence of different test gases in a non-destructive 100% quality control system for medical devices. Current Directions in Biomedical Engineering, 2 (2016), 587-591 DOI: 10.1515/cdbme-2016-0130
  • Dethloff, M.; Dangers, M.; Wilmes, B.; Seitz, H.: Flow optimised design of a novel point-of-care diagnostic device for the detection of disease specific biomarkers. Current Directions in Biomedical Engineering, 2 (2016), 685-688 DOI: 10.1515/cdbme-2016-0149
  • Drescher, P.; Witte, K.; Yang, B.; Steuer, R.; Kessler, O.; Burkel, E.; Schick, C.; Seitz, H.: Composites of amorphous and nanocrystalline Zr–Cu–Al–Nb bulk materials synthesized by spark plasma sintering. Journal of Alloys and Compounds. 667 (2016), 109-114; DOI: 10.1016/j.jallcom.2016.01.161
  • Breddermann, K.; Drescher, P.; Polzin, C.; Seitz, H.; Paschen, M.: Printed Pressure Housings for Underwater Applications. Ocean Engineering, 113 (2016), 57-63, doi:10.1016/j.oceaneng.2015.12.033
  • Bergemann, C.; Cornelsen, M.; Quade, A.; Laube, T.; Schnabelrauch, M.; Weißmann, V.; Seitz, H.; Nebe, J.B.: Continuous cellularization of calcium phosphate hybrid scaffolds induced by plasma polymer activation. Material Science and Engineering C, C59 (2016), 514-523; DOI: 10.1016/j.msec.2015.10.048
2015
  • Pollack, T.; Seitz, H.: Analysis of the release kinetics of surface-bound proteins via laser-induced fluorescence. Current Directions in Biomedical Engineering, 1 (2015), 340-344; DOI: 10.1515/CDBME-2015-0084
  • Mau, R.; Kriebel, K.; Lang, H.; Seitz, H.: Inkjet printing of viable human dental follicle stem cells. Current Directions in Biomedical Engineering, 1 (2015), 112-115; DOI: 10.1515/CDBME-2015-0029
  • Dethloff, M.; Dangers, M.; Wilmes, B.; Seitz, H.: Numerical and experimental flow analysis in centifluidic systems for rapid allergy screening tests. Current Directions in Biomedical Engineering, 1 (2015), 437-441; DOI: 10.1515/CDBME-2015-0105
  • Drobek, C.; Mau, R.; Seitz, H.: Tomographic Particle Image Velocimetry of a water-jet for low volume harvesting of fat tissue for regenerative medicine. Current Directions in Biomedical Engineering, 1 (2015), 345-348; DOI: 10.1515/CDBME-2015-0085
  • Klopsch, V.; Germann, T.; Seitz, H.: Numerical simulation of low-pulsation gerotor pumps for use in the pharmaceutical industry and in biomedicine. Current Directions in Biomedical Engineering, 1 (2015), 433-437; DOI: 10.1515/CDBME-2015-0104
  • Drescher, P; Seitz, H.: Processability of an amorphous metal alloy powder by electron beam melting. RTeJournal - Fachforum für Rapid Technologie, 12 (2015); urn:nbn:de:0009-2-42364
  • Spath, S.; Drescher, P.; Seitz, H.: Impact of Particle Size of Ceramic Granule Blends on Mechanical Strength and Porosity of 3D Printed Scaffolds. Materials, 8 (2015), 4720-4732; doi: 10.3390/ma8084720
  • Berger, M.; Probst, F.; Schwartz, C.; Cornelsen, M.; Seitz, H.; Ehrenfeld, M.; Otto, S.: A concept for scaffold-based tissue engineering in alveolar cleft osteoplasty, Journal of Cranio-Maxillo-Facial Surgery, 43 (2015), 830-836; doi: 10.1016/j.jcms.2015.04.023
  • Beck-Broichsitter, B.E.; Becker, S.T.; Seitz, H.; Wiltfang, J.; Warnke, P.H.: Endocultivation: Histomorphological effects of repetitive rhBMP-2 application into prefabricated hydroxyapatite scaffolds at extraskeletal sites. Journal of Cranio-Maxillo-Facial Surgery, 43 (2015), 981-988; doi: 10.1016/j.jcms.2015.03.038
  • Polzin, C.; Günther, D.; Seitz, H.: 3D printing of porous Al2O3 and SiC ceramics. Journal of Ceramic Science and Technology, 2 (2015), 141-146; DOI: 10.4416/JCST2015-00013
  • Bergemann,C.; Duske, K.; Nebe, J.B.; Schöne, A.; Bulnheim, U.; Seitz, H.; Fischer, J.: Microstructured zirconia surfaces modulate osteogenic marker genes in human primary osteoblasts. Journal of Materials Science: Materials in Medicine, 26 (2015), 26; DOI 10.1007/s10856-014-5350-x
2014
  • Vehse, M.; Petersen, S.; Sternberg, K.; Seitz, H.: Drug delivery from poly(ethylene glycol) diacrylate scaffolds produced by DLC-Micro-Stereolithography. Macromolecular Symposia, 346 (2014), 43-47; DOI: 10.1002/masy.201400060
  • Vehse, M.; Lieberwirth, C.; Seitz, H.: (Micro-) Stereolithography based on Diode Laser Curing (DLC) and its Potential Applications in Tissue Engineering. Biomedical Engineering, Volume 59, Issue S1 (2014), S276-S278; DOI 10.1515/bmt-2014-4122
  • Drobek, C.; Seitz, H.: Towards the CFD-based simulation of rigid body movement and shear stress of human cells in fluid flow. Biomedical Engineering, Volume 59, Issue S1 (2014), S921-S924; DOI 10.1515/bmt-2014-5012
  • Drescher, P.; Seitz, H.: Fabrication of scaffolds with different pore sizes using a low-cost 3d printer. Biomedical Engineering, Volume 59, Issue S1 (2014), S1184-S1186; DOI 10.1515/bmt-2014-4533
  • Pollack, T.; Seitz, H.: Experimental Investigations on Medical Devices for the Development of a Non-Destructive Quality Control. Biomedical Engineering, Volume 59, Issue S1 (2014), S1253-S1256; DOI 10.1515/bmt-2014-5016
  • Drescher, P.; Spath, S.; Seitz, H.: Fabrication of biodegradeable, porous scaffolds using a low-cost 3D printer. International Journal of Rapid Manufacturing, 4 (2014), 140-147; DOI: 10.1504/IJRAPIDM.2014.066035
  • Drescher, P.; Reimann, T.; Seitz, H.: Investigation of powder removal of net-structured titanium parts made from electron beam melting. International Journal of Rapid Manufacturing, 4 (2014), 81–89; DOI: 10.1504/IJRAPIDM.2014.066007
  • Drescher, P.; Dangers, M.; Rübenhagen, R.; Seitz, H.: The Effects of various flow velocities on the sensitivity of an ELSIA in a fluid allergy diagnostic device, Point of Care: The Journal of Near-Patient Testing and Technology, 2 (2014), 35-40; doi: 10.1097/POC.0000000000000016
  • Quan, Y.; Drescher, P.; Zhang, F.; Burkel, E.; Seitz, H.: Cellular Ti6Al4V with carbon nanotube-like structures fabricated by selective electron beam melting. Rapid Prototyping Journal, 20 (2014), 541-550; DOI 10.1108/RPJ-05-2013-0050
  • Vehse, M.; Seitz, H.: A new Micro-Stereolithography-System based on Diode Laser Curing (DLC). International Journal of Precision Engineering and Manufacturing, 15 (2014), 2161-2166; DOI: 10.1007/s12541-014-0577-5
  • Polzin, C.; Günther, D.; Ederer, I.; Seitz, H.: 3D-Drucken von Aluminiumoxid- und Siliziumkarbidkeramiken. RTejournal - Forum für Rapid Technologie, 11 (2014); urn:nbn:de:0009-2-39614
  • Hennig, J.; Drescher, P.; Riedl, C.; Schieker, M.; Seitz, H.: A Novel Cell Seeding Chamber for Tissue Engineering and Regenerative Medicine. Processes, 2 (2014), 361-370; doi:10.3390/pr2020361
  • Spath, S.; Seitz, H.: Influence of grain size and grain-size distribution on workability of granules with 3D printing. International Journal of Advanced Manufacturing Technology, 70 (2014), 135-144; DOI 10.1007/s00170-013-5210-8
2013
  • Wieding, J.; Fritsche, A.; Heinl, P.; Koerner, C.; Cornelsen, M.; Seitz, H.; Mittelmeier, W.; Bader, R.: Biomechanical behavior of bone scaffolds made of additive manufactured tricalciumphosphate and titanium under different loading conditions. Journal of Applied Biomaterials and Functional Materials, 3 (2013), 159 - 166; DOI:10.5301/JABFM.2013.10832
  • Schuster, C.; Merschjann, C.; Rothe, N.; Fiedler, S.; Irsig, R.; Meiwes-Broer, K.-H.; Vehse, M.; Seitz, H.; Senz, V.; Sternberg, K.; Lochbrunner, S.: Machining of biocompatible polymers with shaped femtosecond laserpulses. Biomedical Engineering, Volume 58, Issue S1 (2013); DOI: 10.1515/bmt-2013-4085;
  • Fiedler, S.; Irsig, R.; Tiggesbäumker, J.; Schuster, C.; Merschjann, C.; Rothe, N.; Lochbrunner, S.; Vehse, M.; Seitz, H.; Klinkenberg, E.-D.; Meiwes-Broer, K.-H.: Machining of biocompatible ceramics with femtosecond laser pulses. Biomedical Engineering, Volume 58, Issue S1 (2013); DOI 10.1515/bmt-2013-4093
  • Pollack, T.; Seitz, H.: On the Development of a Test Setup for a Non-Destructive Quality Control of Centifluidic Medical Devices. Biomedical Engineering, Volume 58, Issue S1 (2013); DOI 10.1515/bmt-2013-4451
  • Drescher, P.; Wilmes, B.; Dangers, M.; Rübenhagen, R.; Seitz, H.: Comparison of Elisa Sensitivity Relating to Manual and Low-Pressure Loading of the Fluidic Test Device. Biomedical Engineering, Volume 58, Issue S1 (2013); DOI 10.1515/bmt-2013-4152
  • Drobek, C.; Seitz, H.: Simulation of Cell-Laden Flow in a Cell Mixer using Computational Fluid Dynamics. Biomedical Engineering. Volume 58, Issue S1 (2013); DOI 10.1515/bmt-2013-4350
  • Cornelsen, M.; Petersen, S.; Dietsch, K.; Rudolph, A.; Schmitz, K.; Sternberg, K.; Seitz, H.: Infiltration of 3D printed tricalciumphosphate scaffolds with biode-gradable polymers and biomolecules for local drug delivery. Biomedical Engineering. Volume 58, Issue S1 (2013); DOI 10.1515/bmt-2013-4090
  • Spath, S; Seitz, H.: Low-Cost-Herstellung individualisierter Produkte. RTejournal - Forum für Rapid Technologie, 10 (2013); urn:nbn:de:0009-2-38209
  • Vaezi, M.; Seitz, H.; Yang, S.: A review on 3D micro-additive manufacturing technologies. International Journal of Advanced Manufacturing Technology, 67 (2013), 1721-1754; DOI 10.1007/s00170-012-4605-2
  • Polzin, C.; Spath, S.; Seitz, H.: Characterization and evaluation of a PMMA-based 3D printing process. Rapid Prototyping Journal, 19 (2013), 37-43; doi:10.1108/13552541311292718
2012
  • Polzin, C.; Seitz, H.: 3D-Druck von Kunststoff-Medizinprodukten. RTejournal - Forum für Rapid Technologie, 9 (2012); urn:nbn:de:0009-2-34098
  • Becker, S.T.; Bolte, H.; Schünemann, K.; Seitz, H.; Bara, J.J.; Beck-Broichsitter, B.E.; Russo, P.A.J.; Wiltfang, J.; Warnke, P.H.: Endocultivation: the influence of delayed vs. simultaneous application of BMP-2 onto individually formed hydroxyapatite matrices for heterotopic bone induction. International Journal of Oral and Maxillofacial Surgery, 9 (2012), 1153-1160; doi:10.1016/j.ijom.2012.03.031
  • Nebe, J.B.; Cornelsen, M.; Quade, A.; Weissmann, V.; Kunz, F.; Ofe, S.; Schroeder, K.; Finke, B.; Seitz, H.; Bergemann, C.: Osteoblast Behavior in vitro in Porous Calcium Phosphate Composite Scaffolds, Surface Activated with a Cell Adhesive Plasma Polymer Layer. Mater Sci For, 706-709 (2012), 566-571; doi:10.4028/www.scientific.net/MSF.706-709.566
  • Vehse, M.; Gieseke, M.; Fiedler, S.; Petersen, S.; Irsig, R.; Senz, V.; Löbler, M.; Hustedt, M.; Kaierle, S.; Haferkamp, H.; Sternberg, K.; Schmitz, K.-P.; Lochbrunner, S.; Meiwes-Broer, K.-H.; Seitz, H.: Loading method for discrete drug depots on implant surfaces. Biomedical Engineering, Volume 57, Suppl. 1 (2012), 1089-1092; DOI 10.1515/bmt-2012-4006
  • Schuster, C.; Rothe, N.; Svanidze, A.V.; Fiedler, S.; Irsig, R.; Tiggesbäumker, J.; Senz, V.; Vehse, M.; Seitz, H.; Lochbrunner, S.: Material processing with shaped femtosecond laser pulses. Biomedical Engineering, Volume 57, Suppl. 1 (2012), 894-896; DOI 10.1515/bmt-2012-4037
  • Fiedler, S.; Irsig, R.; Gieseke, M.; Vehse, M.; Senz, V.; Oniszczuk, A.W.; Tiggesbäumker, J.; Schuster, C.; Svanidze, A.V.; Rothe, N.; Kaierle, S.; Hustedt, M.; Haferkamp, H.; Sternberg, K.; Schmitz, K.-P.; Seitz, H.; Lochbrunner, S.; Meiwes-Broer, K.-H.: Material Processing with Femtosecond Laser Pulses for Medical Applications. Biomedical Engineering, Volume 57, Suppl. 1 (2012), 603-605; DOI 10.1515/bmt-2012-4405
  • Hennig, J.; Schieker, M.; Seitz, H.: Cell seeding chamber for bone graft substitutes. Biomedical Engineering, Volume 57, Suppl. 1 (2012), 681-684; DOI 10.1515/bmt-2012-4242
  • Löbler, M.; Vehse, M.; Seitz, H.; Schmitz, K-P.: Laser structuring of silica surface improves cell adhesion. Biomedical Engineering, Volume 57, Suppl. 1 (2012), 423-425; DOI 10.1515/bmt-2012-4317
  • Vehse, M.; Löbler, M.; Schmitz, K-P.; Seitz, H.: Laser induced surface structure on stainless steel influences cell viability. Biomedical Engineering, Volume 57, Suppl. 1 (2012), 419-421; DOI 10.1515/bmt-2012-4007
  • Gieseke, M.; Senz, V.; Vehse, M.; Fiedler, S.; Irsig, R.; Hustedt, M.; Sternberg, K.; Nölke, C.; Kaierle, S.; Wesling, V.; Tiggesbäumker, J.; Meiwes-Broer, K.-H.; Seitz, H.; Schmitz, K.-P.; Haferkamp, H.: Additive Manufacturing of Drug Delivery Systems. Biomedical Engineering, Volume 57, Suppl. 1 (2012), 398-401; DOI 10.1515/bmt-2012-4109
vor 2012
  • Jonitz, A.; Wieding, J.; Lochner, K.; Cornelsen, M.; Seitz, H.; Hansmann, D.; Bader, R.: Migration capacity and viability of human primary osteoblasts in synthetic three-dimensional bone scaffolds made of tricalciumphosphate. Materials, 4 (2011), 1249-1259; doi:10.3390/ma4071249
  • Detsch, R.; Schaefer, S.; Deisinger, U.; Ziegler, G.; Seitz, H.; Leukers, B.: In vitro-osteoclastic activity studies on 3D-printed calcium phosphate scaffolds. Journal of Biomaterials Applications, 3 (2011), 359-380; DOI: 10.1177/0885328210373285
  • Warnke, P.H.; Seitz, H.; Warnke, F.; Becker, S.T.; Sivananthan, S.; Sherry, E.; Liu, Q.; Wiltfang, J.; Douglas, T.: Ceramic scaffolds produced by computer-assisted 3D printing and sintering: Characterization and biocompatibility investigations. J Biomed Mater Res Part B: Appl Biomater, 93B (2010), 212–217; DOI: 10.1002/jbm.b.31577
  • Becker, S.T.; Douglas, T.; Acil, Y.; Seitz, H.; Sivananthan, S.; Wiltfang, J.; Warnke, P.H.: Biocompatibility of individually designed scaffolds towards human periosteum for tissue engineering. J Materials Science: Materials in Medicine, 21 (2010), 1255-1262; DOI: 10.1007/s10856-009-3878-y
  • Becker, S.T.; Bolte, H.; Krapf, O.; Seitz, H.; Douglas, T.; Sivananthan, S.; Wiltfang, J.; Sherry, E.; Warnke, P.H.: Endocultivation: 3D printed customized porous scaffolds for heterotopic bone induction. Oral Oncology, 11 (2009), e181-e210; DOI :10.1016/j.oraloncology.2009.07.004
  • Tille, C.; Bens, A.; Seitz, H.: Processing and Mechanical Properties of a New Flexible Acrylic Stereolithographic Resin Family for Engineering and Medical Device Manufacturing. International Journal of Computer Applications in Technology, 36 (2009), 10-15; DOI: 10.1504/IJCAT.2009.026665
  • Seitz, H.; Deisinger, U.; Leukers, B.; Detsch, R.; Ziegler, G.: Different Calcium Phosphate Granules for 3-D Printing of Bone Tissue Engineering Scaffolds. Advanced Engineering Materials, 11 (2009), B41-B46; DOI:10.1002/adem.200800334
  • Drosse, I.; Volkmer, E.; Seitz, S.; Seitz, H.; Zahn, K.; Penzkofer, R.; Matis, U.; Mutschler, W.; Augat, P.; Schieker, M.: Validation of a femoral critical size defect model for orthotopic evaluation of bone healing: A biomechanical, veterinary and trauma surgical perspective. Tissue Engineering Part C: Methods, 14 (2008), 79-88; DOI:10.1089/tec.2007.0234
  • Seitz, H.: Dreidimensionales Drucken von patientenindividuellem Knochenersatz. RTejournal - Forum für Rapid Technologie, 5 (2008); urn:nbn:de:0009-2-15357
  • Bens, A.; Seitz, H.; Bermes, G.; Emons, M.; Pansky, A.; Roitzheim, B.; Tobiasch, E.; Tille, C.: Non-Toxic Flexible Photopolymers for Medical Stereolithography Technology. Rapid Prototyping Journal, 13 (2007), 38-47; DOI: 10.1108/13552540710719208
  • Irsen, S.H.; Leukers, B.; Höckling, C.; Tille, C.; Seitz, H.: Bioceramic Granulates for use in 3D Printing: Process Engineering Aspects. Materialwissenschaft und Werkstofftechnik, 37 (2006), 533-537; DOI: 10.1002/mawe.200600033
  • Schieker, M.; Seitz, H.; Drosse, I.; Seitz, S.; Mutschler, W.: Biomaterials as Scaffold for Bone Tissue Engineering. European Journal of Trauma, 32 (2006), 114-124; DOI: 10.1007/s00068-006-6047-
  • Bens, A.T.; Tille, C.; Bermes, G.; Emons, M.; Seitz, H.: Novel, Biocompatible Polyether(meth)acrylate-based Formulations for Stereolithography – A New Flexible Material Class for Three-Dimensional Applications. e-Polymers, no. 037 (2005), 1-10; DOI: 10.1515/epoly.2005.5.1.377
  • Leukers, L.; Gülkan, H.; Irsen, S.; Milz, S.; Tille, C.; Schieker, M.; Seitz, H.: Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing. J Materials Science: Materials in Medicine, 16 (2005), 1121–1124; DOI: 10.1002/jbm.b.
Buchbeiträge
  • Alt, K.W.; Knopper, C.; Held, P.; Nicklisch, N.; Fecher, M.; Roth, C.; Enzmann, F.; Tuckermann, J.; Seitz, H.; Polzin, C.; Klopsch, V.; Brauns, M.; Horton, M.; Pike, A.W.G.: Königin Editha – Ein Indizienbeweis zur Identifikation einer historischen Persönlichkeit aus dem Magdeburger Dom. Ed.: Meller, H.; Schenkluhn, W.; Schmuhl, B.E.H. Halle (Saale): Landesamt für Denkmalpflege und Archäologie Sachsen-Anhalt (2012), 105-156, ISBN 978-3-939414-84-1
  • Seitz, H.; Tille, C.; Rieder, W.; Irsen, S.H.; Bermes, G.: Rapid Prototyping Models for Facial Reconstruction. In: Facial Reconstruction – Gesichtsrekonstruktion. Ed.: Buzug, T.M.; Sigl, K.-M.; Bongartz, J.; Prüfer, K. Köln: Luchterhand (2007), 376-399, ISBN 978-3-472-06884-6
  • Irsen, S.; Leukers, B.; Tille C.; Beckmann, F.; Müller, B.; Buzug, T.; Seitz, H.: Image Based Analysis of Bone Graft Samples made by 3D Printing Using Conventional and Synchrotron-Radiation-Based Micro-Computed Tomography. In: Advances in Medical Engineering, Springer Series: Proceedings in Physics 114. Ed.: Buzug, T.M.; Holz, D.; Weber, S.; Bongartz, J.; Kohl-Bareis, M.; Hartmann, U. Berlin: Springer (2007), 121-126, ISBN 978-3-540-68763-4
Begutachtete Konferenzbeiträge
  • Plocksties, F.; Niemann, C.; Bader, R.; Möws, F.; Seitz, H.; Kämmerer, P.; Dau, M.; Kamp, V.; Heller, J.; Timmermann, D.: Requirements and Design of an Implant for Electrical Stimulation for Bone Regeneration in Animals. IEEE 2nd Global Conference on Life Sciences and Technologies (LifeTech), Kyoto, Japan, (2020), 157-160 DOI: 10.1109/LifeTech48969.2020.1570619159
  • Rekowska, N.; Arbeiter, D.; Brietzke, A.; Konasch, J.; Riess, A.; Mau, R.; Eickner, T.; Seitz, H.; Grabow, N.; Teske, M.: Biocompatibility and thermodynamic properties of PEGDA and two of its co-polymers. 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), Berlin, Germany, (2019), 1093-1096 DOI: 10.1109/EMBC.2019.8857503
  • Weizel, A.; Zimmermann, J.; Riess, A.; Krüger, S.; Bader, R.; van Rienen, U.; Seitz, H.: Numerical simulation of the electric field distribution in an electrical stimulation device for scaffolds settled with cartilaginous cells. 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), Berlin, Germany, (2019), 6481-6484 DOI: 10.1109/EMBC.2019.8857760
  • Vehse, M.; Seitz, H.: Diode Laser Curing as Micro Manufacturing Technology. RET Stralsund. XXIII International Symposium – RET. Stralsund 12.-13. October (2017), 1-7
  • Drescher, P.; Seitz, H.: Investigation Of Sintering Parameters On Ti6Al4V Powder For Electron Beam Melting Process Variation. World PM2016, Proceedings, Hamburg, (2016), 1-4
  • Drobek, C.; Seitz, H.: Bestimmung des turbulenten Umschlags in einer Couette-Anordnung zur Ermittlung der Scherbelastbarkeit menschlicher Zellen mit Mikro-PIV und Grobstruktursimulation. Konferenz CD zur GALA - Fachtagung Experimentelle Strömungsmechanik, Cottbus, (2016), 48-1-8
  • Lieberwirth, C.; Seitz, H.: Additive Fertigung mit Metallspritzguss-Granulaten. Rapid.Tech, Konferenz CD zur Anwendertagung, Erfurt, (2016), Session 2, Vortrag 4, 1-8 DOI: 10.3139/9783446450608.022
  • Lieberwirth, C.; Harder, A.; Seitz, H.: Extrusion Based Additive Manufacturing of Metal Parts. Conference Proceedings, DDMC2016, Berlin, March 16-17 (2016), 1-4 ISBN 978-3-8396-1001-5
  • Polzin, C.; Drescher, P.; Seitz, H.: Additive Fertigung neuer metallischer Werkstoffe und technischer Keramiken. Deutscher Luft- und Raumfahrtkongress, Rostock, 22.-24.September (2015), 1-4 urn:nbn:de:101:1-201601222848
  • Drescher, P.; Lehmann, U.; Seitz, H.: Verarbeitbarkeit von amorphem Metallpulver mittels Elektronenstrahlschmelzen. Rapid.Tech, Konferenz CD zur Anwendertagung, Erfurt, (2015), Session 2, Vortrag 2, 1-12
  • Drobek, C.; Mau, R.; Seitz, H.: Tomographisches PIV eines Wasserstrahls für die wasserstrahl-assistierte Liposuktion. Konferenz CD zur GALA - Fachtagung Lasermethoden in der Strömungsmesstechnik, Dresden, (2015), 23-1-8
  • Polzin, C.; Günther, D.; Ederer, I.; Seitz, H.: 3D-Drucken von Aluminiumoxid- und Siliciumcarbidkeramiken. Rapid.Tech, Konferenz CD zur Anwendertagung, Erfurt, (2014), Session 3, Vortrag 3/1, 1-6
  • Vehse, M.; Petersen, S.; Sternberg, K.; Seitz, H.: Drug delivery from photo polymerized poly(ethylene glycol) diacrylate scaffolds. Polymers for Advanced Technologies, Volume 24, Suppl. 1 (2013), 156-157
  • Cornelsen, M.; Weise, T.; Lawrenz, F.; Helm, C.A.; Seitz, H.: Veredelung von nichtrostenden Stahloberflächen mittels Plasmapolieren. Conference Proceedings; Thüringer Grenz‐ und Oberflächentage, Zeulenroda , (2013), 155-159
  • Vehse, M.; Petersen, S.; Oldorf, P.; Peters, R.; Bendig, F.; Schuster, C.; Merschjann, C.; Lochbrunner, S.; Meiwes-Broer, K.-H.; Sternberg, K.; Schmitz, K.-P.; Seitz, H.: Drug delivery from laser drilled discrete drug depots, BioNanoMaterials, Volume 14, Suppl. 1 (2013), 36
  • Vehse, M.; Seitz, H.: Kompakte Mikro-Stereolithographieanlage auf Basis eines Diodenlasers. Rapid.Tech, Konferenz CD zur Anwendertagung, Erfurt, (2013), Session 4, Vortrag 1, 1-5
  • Drescher, P.; Spath, S.; Seitz, H.: Improvement of mechanical properties of bone tissue engineered scaffolds through sintering and infiltration with biopolymers. Proceedings of the IASTED International Conference Biomedical Engineering (BioMed 2013), Innsbruck, Austria, February 13 - 15, (2013), 447-450 DOI: 10.2316/P.2013.791-169
  • Bergemann, C.; Cornelsen, M.; Quade, A.; Finke, B.; Weismann, V.; Ofe, S.; Schroeder, K.; Seitz, H.; Nebe, J.B.: Activation of calcium phosphate scaffolds with a plasma polymer layer induces enhanced cell acceptance. Conference Proceedings; Thüringer Grenz‐ und Oberflächentage, Zeulenroda , (2011), 249-254
  • Wieding, J.; Fritsche, A.; Heinl, P.; Cornelsen, M.; Bader, R.: Biomechanische Analyse von 3D-Formkörpern aus Tricalciumphosphat (TCP) und Titan für große segmentale Knochendefekte. Biomedizinische Technik, Volume 55, Suppl. 1 (2010), 81-84 DOI 10.1515/BMT.2010.582
  • Irsig, R.; Lochbrunner, S.; Meiwes-Broer, K.-H., Seitz, H.; Tiggesbäumker, J.; Vehse, M.: Oberflächenstrukturierung mit ultrakurzen Laserpulsen. Biomedizinische Technik, Volume 55, Suppl. 1 (2010), 46-47 DOI 10.1515/BMT.2010.462
  • Bergemann, C.; Wetzel, J.; Klinkenberg, E.-D.; Weißmann, V.; Ofe, S.; Spath, S.; Cornelsen, M.; Seitz, H.; Lange, R.; Elter, P.; Beck, U.; Lindner, T.; Bader, R.; Nebe, J.B.: Development of a three dimensional in vitro model system for nondestructive investigation of osteoblast cell growth in scaffolds. Conference Proceedings; E-MRS fall meeting 2009, Warschau, September 14-18, (2009), 11-19
  • Seitz, H.: Dreidimensionales Drucken individualisierter Knochenersatzimplantate. Rapid.Tech, Konferenz CD zum 1. Fachkongress Medizintechnik, Erfurt, (2010), Session 3, Vortrag 1, 1-4
  • Irsen, S.H.; Leukers, B.; Bruckschen, B.; Tille, C.; Seitz, H.; Beckmann, F.; Müller, B.: Image-based analysis of the internal microstructure of bone replacement scaffolds fabricated by 3D printing. Progress in Biomedical Optics and Imaging - Proceedings of SPIE. Volume 6318, (2006), 631809-1-10
  • Seitz, H.; Irsen, S.H.; Leukers, B.; Rieder, W.; Tille, C.: Mechanical properties of porous ceramic scaffolds made by 3D printing. VRAP2005: 2nd International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, (2005), 109-113
  • Tille, C.; Bens, A.T.; Seitz, H.: Processing Characteristics and Mechanical Behavior of a Novel Stereolithographic Resin System for Engineering and Biomedicine. VRAP2005: 2nd International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, (2005), 311-315
  • Kovacs, L.; Zimmermann, A.; Eder, M.; Brockmann, G.; Papadopulos, N.A.; Wawrzyn, H.; Tille, C.; Seitz, H.; Schwenzer, K.; Sader, R.; Zeilhofer, H.-F.: Opportunities and limitations of the computer-aided surgical reconstruction after complex facial burn injuries. CARS2005: Computer Assisted Radiology and Surgery, Chicago, International Congress Series 1281, (2005), 504-508
  • Seitz, H.; Leukers, B.; Irsen, S.H.; Rieder, W.; Tille, C.: Fabrication of hydroxyapatite bone repair scaffolds using 3D printing. Conference Proceedings, ICBME 2005 - The 12th International Conference on Biomedical Engineering, Singapore, (2005), 3A2-01-1-4
  • Bens, A.T.; Tille, C.; Leukers, B.; Bermes, G.; Emons, M.; Sobe, R.; Roitzheim, B.; Schulze, M.; Tobiasch, E.; Seitz, H.: Mechanical properties and bioanalytical characterization for a novel non-toxic flexible photopolymer formulation class. Conference Proceedings, SFF2005: 16th Solid Freefrom Fabrication Symposium, Austin, Texas, (2005), 162-173
  • Tille, C.; Seitz, H.; Schaefer, D.J.; Irsen, S.; Ritter, L.; Zeilhofer, H.F.: New approach to modeling 3D-shaped ceramic bone substitutes for craniofacial surgery via rapid prototyping – a case study. Proceedings of CMBBE2004: 6th Symp. on Computer Methods in Biomechanics and Biomedical Engineering, Madrid, February 25-28, (2004), 190R-1-6
  • Seitz, H.; Tille, C.; Irsen, S.; Bermes, G.; Sader, R.; Zeilhofer, H.-F.: Rapid Prototyping models for surgical planning with hard and soft tissue representation. CARS2004: Computer Assisted Radiology and Surgery, Chicago, International Congress Series 1268, (2004), 567-572
  • Seitz, H.: Modeling and Numerical Simulation of the Crosstalk Behavior of a DOD Printhead. Proceedings IS&T’s NIP 19: International Conference on Digital Printing Technologies, New Orleans, (2003), 343-347
  • Seitz, H.; Welisch, A.: A Fast SFF Process Using A Multijet Printhead. Conference Proceedings, 27th ICC&IC, International Conference on Computers and Industrial Engineering, Beijing, China, (2000), CD, 5p
  • Ederer, I., Seitz, H., Welisch, A.: Fast Ink-Jet Based Process. Conference Proceedings, SFF1999: 10th Solid Freeform Fabrication Symposium, Austin, Texas, (1999), 631 – 638
Patente und Patentanmeldungen

Erteilt:

  1. Seitz, H.; Grabow, N.; Matzmohr, R.; Teske, M.; Eickner, T.; Mau, R.; Riess, A.; Schmitz, K.-P.: Vorrichtung zur Herstellung von 3D-gedruckten Wirkstofffreisetzungssystemen mit Wirkstoffdepots, sowie Verfahren zur Herstellung von 3D-gedruckten Wirkstofffreisetzungssystemen. DE102018107585B3
  2. Warnke PH, Seitz H, Spath S: Gelenkscaffold. DE102011087899B4
  3. Schieker M, Seitz H, Hennig J: Zellbesiedelungskammer. DE102009008923B4
  4. Irsen S, Leukers B, Seitz H, Tille C: Materialsystem für das 3D-Drucken. DE102006029298B4
  5. Heinzl J, Ederer I, Seitz H: Drop-on-Demand printhead with piezo bending transducers and driving method for the same. EP0001036660B1
  6. Heinzl J, Ederer I, Seitz H: Piezoelectric deflection converter type drop on-demand printing head and control method thereof. JP2000296619A
  7. Heinzl J, Ederer I, Seitz H: Demand falling printing head of piezoelectric bending transducer and control method thereof. CN000001182962C
  8. Heinzl,J, Ederer I, Seitz H: Piezo bending transducer drop-on-demand print head and method of actuation it. US0006460979B1
  9. Heinzl J, Ederer I, Seitz H: Verfahren zum Ansteuern eines Piezo-Druckkopfes und nach diesem Verfahren an-gesteuerter Piezo-Druckkopf. DE19911399C2

Angemeldet:

  1. Lieberwirth, C.; Seitz, H.: Extruder For A System For The Additive Manufacture Of Metal Parts Using The Composite Extrusion Modeling (CEM). US020200324337A1
  2. Lieberwirth, C.; Seitz, H.: Extruder For A System For The Additive Manufacture Of Metal Parts Using The Composite Extrusion Modeling (CEM). EP000003463799A1
  3. Lieberwirth, C.; Seitz, H.: Extruder For A System For The Additive Manufacture Of Metal Parts Using The Composite Extrusion Modeling (CEM). CN000109414862A
  4. Lieberwirth, C.; Morrison, V.; Rückborn, T.; Seitz, H.; Zielke, R.: Device and Method for the extrusion of thermo-mechanically deformable materials in bulk form, and compact screw extruder. CN000110869184A
  5. Lieberwirth, C.; Morrison, V.; Rückborn, T.; Seitz, H.; Zielke, R.: Device and Method for the extrusion of thermo-mechanically deformable materials in bulk form, and compact screw extruder. EP000003648946A1
  6. Rückborn, T.; Zielke, R.; Lieberwirth, C.; Morrison, V.; Seitz, H.: Device and Method for the extrusion of thermo-mechanically deformable materials in bulk form, and compact screw extruder. US020200130231A1
  7. Seitz, H.; Grabow, N.; Matzmohr, R.; Teske, M.; Eickner, T.; Mau, R.; Riess, A.; Schmitz, K.-P.: Device for Producing 3D-Printed Active Substance-Releasing Systems with Active Substance Depots, and Method for Producing 3D-Printed Active Substance-Releasing Systems. WO2019185725A1
  8. Lieberwirth, C.; Morrison, V.; Rückborn, T.; Seitz, H.; Zielke, R.: Device and Method for the extrusion of thermo-mechanically deformable materials in bulk form, and compact screw extruder. WO002019007756A1
  9. Bader, R.; Bender, T.; Jonitz-Heincke, A.; Seitz, H.; Lieberwirth, C.; Riess, A.: Vorrichtung zur elektrischen und mechanischen Stimulation von Gewebeproben, DE102018114019A1
  10. Lieberwirth, C.; Seitz, H.: Extruder for a system for the additive manufacture of metal parts using the composite extrusion modeling (CEM) method. WO2017202398A1
  11. Rückborn, T.; Zielke, R.; Lieberwirth, C.; Morrison, V.; Seitz, H.: Vorrichtung und Verfahren zur Extrusion von thermo-mechanisch verformbaren Materialien in Schüttgutform und Schneckenextruder kompakter Bauform, DE102017114841A1
  12. Drescher, P.; Lieberwirth, C.; Seitz, H.: Kombinationsdruck zur additiven Fertigung eines Bauteils aus einer Metall-Kunststoff-Kombination. DE102016010923A1
  13. Lieberwirth, C.; Seitz, H.: Extruder für eine Anlage zur additiven Fertigung von Metallteilen mittels eines Extrusionsverfahrens – Composite Extrusion Modeling (CEM). DE112016006911A5
  14. Cornelsen, M.; Weise, T.; Kluchert, C,; Klopsch, V.; Seitz, H.: Polierkopf und Verfahren zum Plasmapolieren einer Innenfläche eines Werkstücks. DE102016100558A1
  15. Cornelsen, M.; Weise, T.; Kluchert, C,; Klopsch, V.; Seitz, H.: Polierkopf und Verfahren zum Plasmapolieren einer Innenfläche eines Werkstücks. DE202016100150U1
  16. Drescher, P.; Lieberwirth, C.; Seitz, H.: Verfahren und Anlage zur Additiven Fertigung von amorphen kristallinen und/oder teilkristallinen Metallbauteilen. WO002016086912A2
  17. Drescher, P.; Lieberwirth, C.; Seitz, H.: Verfahren und Anlage zur Additiven Fertigung von amorphen kristallinen und/oder teilkristallinen Metallbauteilen - Selective Amorphus Metal Extrusion (SAME). DE102014018080A1
  18. Drescher, P.; Lieberwirth, C.; Seitz, H.: Verfahren und Anlage zur additiven Fertigung von amorphen kristallinen und/oder teilkristallinen Metallbauteilen - Selective Amorphus Metal Extrusion (SAME). DE112015005447A5
  19. Lieberwirth C, Seitz, H: Verfahren und Anlage zur additiven Fertigung von Metallteilen mittels eines Extrusions-verfahrens. DE102014018081A1
  20. Vehse M, Seitz H: Stereolithographie-System. DE102013021961A1
  21. Vehse M, Seitz H, Hennig J: Stereolithography System. WO2013182913A3
  22. Seitz H, Warnke P, Spath: Joint Scaffold. WO002013083480A1
  23. Vehse, M, Seitz H, Hennig J: Stereolithographie-System. DE102012011418A1
  24. Vehse M, Seitz H, Grabow N, Schmitz KP, Senz V, Sternberg K: Wirkstoff freisetzendes Implantat und Verfahren und Vorrichtung zur seiner Herstellung. DE102012208615A1
  25. Warnke PH, Seitz H, Spath S: Gelenkscaffold. DE102011087899A1
  26. Sobe R, Tille C, Seitz H, Bens A: Bermes, G.: Method and Apparatus for Producing Three-Dimensional Shaped Bodies. WO002007012429A1
  27. Irsen S, Seitz H, Leukers B, Tille C: Material System for 3D Printing. WO002007147625A3
  28. Bens AT, Seitz H, Tille C: Flüssige Strahlungshärtungszusammensetzungen. EP000001773901A1
  29. Irsen S, Leukers B, Müffler S, Seitz H, Tille C: Patientenindividuelles Implantatlager. DE102006047054A1
  30. Bens AT, Seitz H, Tille C: Liquid Radiation-Curing Compositions. WO002006005772A1
  31. Bens AT, Seitz H, Tille C: Liquid Radiation-Curing Compositions. US020080258345A1
  32. Seitz H, Rieder W, Tille C: Verfahren zum schichtweisen Aufbau von Objekten mit Kanalstruktur. DE102005013722A1
  33. Sobe R, Tille C, Seitz H, Bens A, Bermes G: Verfahren zur Herstellung von dreidimensionalen Formkörpern. DE102005035987A1
  34. Bens AT, Seitz H, Tille C: Flüssige, strahlungshärtende Zusammensetzungen. DE102004034416A1
  35. Schieker M, Seitz H, Tille C: Kultivierungskammer. DE102004035107A1
Abgeschlossene Dissertationen

Dr.-Ing. Christoph Drobek, Auslegung, Simulation und Validierung einer Apparatur zur Aufbringung hoher Scherbelastungen auf Zellen in Suspension, 2019

Dr.-Ing. Christian Polzin, Etablierung neuer Materialsysteme in einem Pulver-Binder-3D-Druckprozess, 2018

Dr.-Ing. Philipp Drescher, Neue Sinterstrategie zur Produktivitätsoptimierung des Elektronenstrahlschmelzverfahrens, 2017

Dr.-Ing. Vincent Morrison, Reduktion der Druck- und Volumenstrompulsation von Mikropumpen mittels optimierter Verzahnungen, 2016

Dr.-Ing. Jörn Henning, Auslegung einer Zellbesiedelungskammer zur intraoperativen Vitalisierung von Gewebeersatzmaterialien, 2016

Dr.-Ing. Mark Vehse, Mikro-Stereolithographie-Anlage auf der Basis eines linear verfahrbaren Diodenlasers, 2014

Dr.-Ing. Sebastian Spath, Einfluss der Partikelgröße von Granulaten auf deren Verarbeitung im 3D-Druck-Verfahren und die Beschaffenheit von 3D-gedruckten Implantatkeramiken, 2014

Dr.-Ing. Arnd Sommerfeld, Antriebskonzepte für miniaturisierte Pumpen, 2009