Peer-reviewed journal articles

Scopus Author ID: 56212740600

ResearcherID: G-1657-2015

Google Scholar

2020

  • Krueger, S.; Riess, A.; Jonitz-Heincke, A.; Weizel, A.; Seyfarth, A.; Seitz, H.; Bader, R. Establishment of a New Device for Electrical Stimulation of Non-Degenerative Cartilage Cells In Vitro. International Journal of Molecular Science, 22 (2021), 394 DOI: 10.3390/ijms22010394
  • Weizel, A.; Distler, T.; Schneidereit, D.; Friedrich, O.; Bräuer, L.; Paulsen, F.; Detsch, R.; Boccaccini, A.R.; Budday, S.; Seitz, H.: Complex mechanical behavior of human articular cartilage and hydrogels for cartilage repair. Acta Biomaterialia, 118 (2020), 113-128 DOI: 10.1016/j.actbio.2020.10.025
  • Schnell, G.; Polley, C.; Bartling, S.; Seitz, H.: Effect of Chemical Solvents on Change in Wetting Behavior Over Time on Femtosecond Laser Structured Ti6Al4V Surfaces. Nanomaterials, 10 (2020), 1241 DOI: 10.3390/nano10061241
  • Polley, C.; Distler, T.; Detsch, R.; Lund, H.; Springer, A.; Boccaccini, A.R.; Seitz, H.: 3D Printing of Piezoelectric Barium Titanate-Hydroxyapatite Scaffolds with Interconnected Porosity for Bone Tissue Engineering. Materials, 13 (2020), 1773 DOI: 10.3390/ma13071773
  • Distler, T.; Fournier, N.; Grünewald, A.; Polley, C.; Seitz, H.; Detsch, R.; Boccaccini, A.R.: Polymer-Bioactive Glass Composite Filaments for 3D Scaffold Manufacturing by Fused Deposition Modelling: Fabrication and Characterization. Frontiers in Bioengineering and Biotechnology Biomaterials, 8 (2020), 552 DOI: 10.3389/fbioe.2020.00552
  • Drobek, C.; Waletzko, J.; Weißmann, V.; Seehafer, S.; Mau, R.; Jonitz-Heincke, A.; Bader, R.; Schwerdt, D.; Dau, M.; Frerich, B.; Seitz, H.: Initial study on removing cellular residues from hydrostatic high-pressure treated allogeneic tissue using ultrasound. Current Directions in Biomedical Engineering 6 (2020), 176-179 DOI: 10.1515/cdbme-2020-3045
  • Rekowska, N.; Konasch, J.; Riess, A.; Mau, R.; Eickner, T., Seitz, H.; Grabow, N., Teske, M.: PEGDA drug delivery scaffolds prepared with UV curing process. Current Directions in Biomedical Engineering, 6 (2020), 193-195 DOI: 10.1515/cdbme-2020-3049
  • Mau, R.; Reske, T.; Eickner, T.; Grabow, N.; Seitz, H.: DLP 3D printing of Dexamethasoneincorporated PEGDA-based photopolymers: compressive properties and drug release. Current Directions in Biomedical Engineering, 6 (2020), 406-409 DOI: 10.1515/cdbme-2020-3105
  • Polley, C.; Kussauer, S.; David, R.; Barkow, P.; Mau, R.; Seitz, H.: Printing of vessels for small functional tissues – a preliminary study. Current Directions in Biomedical Engineering, 6 (2020), 469-472 DOI: 10.1515/cdbme-2020-3121
  • Philipp, D.; Oldorf, P.; Peters, R.; Seitz, H.: Microstructured ceramic and metallic implant surfaces and their impact on the viscosity of a synovia fluid substitute. Current Directions in Biomedical Engineering, 6 (2020), 620-623 DOI: 10.1515/cdbme-2020-3158
  • Hutsaylyuk, V.; Lytvynenko, I.; Maruschak, P.; Dzyura, V.; Schnell, G.; Seitz, H.: A New Method for Modeling the Cyclic Structure of the Surface Microrelief of Titanium Alloy Ti6Al4V After Processing with Femtosecond Pulses. Materials, 13 (2020), 4983 DOI: 10.3390/ma13214983
  • Barillas, L.; Makhneva, E.; Weltmann, K.-D.; Seitz, H.; Fricke, K.: Plasma Printing – Direct local patterning with functional polymer coatings for biosensing and microfluidics applications. Microelectronic Engineering, (2020), 111431 DOI: 10.1016/j.mee.2020.111431
  • Drescher, P.; Oldorf, P.; Dreier, T.; Schnell, G.; Peters, R.; Seit, H.: Ring-Shaped Surface Microstructures for Improved Lubrication Performance of Joint Prostheses. Lubricants, 8 (2020), 45 DOI: 10.3390/lubricants8040045
  • Schnell, G.; Duenow, U.; Seitz, H.: Effect of laser pulse overlap and scanning line 2 overlap on femtosecond laser structured Ti6Al4V 3 surfaces. Materials, 13 (2020), 969 DOI: 10.3390/ma13040969
  • Vaezi, M.; Drescher, P.; Seitz, H.: Beamless Metal Additive Manufacturing. Materials, 13 (2020), 922 DOI: 10.3390/ma13040922
  • Probst, F.A.; Fliefel, R.; Burian, E.; Probst, M.; Eddicks, M.; Cornelsen, M.; Riedl, C.; Seitz, H.; Aszodi, A.; Schieker, M.; Otto, S.: Bone regeneration of minipig mandibular defect by adipose derived mesenchymal stem cells (ADSCs) seeded tri-calcium phosphate-poly(D,L-lactide-co-glycolide) (TCP-PLGA) scaffolds: An In-vivo Study. Scientific Reports, 10 (2020), 2062 DOI: 10.1038/s41598-020-59038-8
  • Charbonnier, B.; Maillard, S.; Sayed, O.; Baradaran, A.; Mangat, H.; Dallison, B.; Zhang, Z.; Zhang, Y.L.; Hussain, S.N.A.; Mayaki, D.; Seitz, H.; Harvey, E.J.; Gilardino, M.; Gbureck, U.; Makhoul, N.; Barralet, J.: Biomaterial-Induction of a Transplantable Angiosome. Advanced Functional Materials, 30 (2020), 1905115 DOI: 10.1002/adfm.201905115

2019

  • Konasch, J.; Riess, A.; Mau, R.; Teske, M.; Rekowska, N.; Eickner, T.; Grabow, N.; Seitz, H.: A Novel Hybrid Additive Manufacturing Process for Drug Delivery Systems with Locally Incorporated Drug Depots. Pharmaceutics, 11 (2019), 661 DOI: 10.3390/pharmaceutics11120661
  • Mau, R.; Nazir, J.; John, S.; Seitz, H.: Preliminary Study on 3D printing of PEGDA Hydrogels for Frontal Sinus Implants using Digital Light Processing (DLP). Current Directions in Biomedical Engineering. Current Directions in Biomedical Engineering, 5 (2019), 249-252 DOI: 10.1515/cdbme-2019-0063
  • Drescher, P.; Oldorf, P.; Dreier, T.; Peters, R.; Seitz, H.: Modification of joint prosthesis surfaces by ultrashort pulse laser treatment for improved joint lubrication. Current Directions in Biomedical Engineering. Current Directions in Biomedical Engineering, 5 (2019), 57-60 DOI: 10.1515/cdbme-2019-0015
  • Rekowska, N.; Arbeiter, D.; Konasch, J.; Riess, A.; Mau, R.; Eickner, T.; Seitz, H.; Grabow, N.; Teske, M.: Thermomechanical properties of PEGDA in combination with different photo-curable comonomers. Current Directions in Biomedical Engineering, 5 (2019), 319-322 DOI: 10.1515/cdbme-2019-0080
  • Schnell, G.; Jagow, C.; Springer, A.; Frank, M.; Seitz, H.: Time-Dependent Anisotropic Wetting Behavior of Deterministic Structures of Different Strut Widths on Ti6Al4V. Metals, 9 (2019), 938 DOI: 10.3390/met9090938
  • Maizza, G.; Caporale, A.; Polley, C.; Seitz, H.: Micro-Macro Relationship between Microstructure, Porosity, Mechanical Properties, and Build Mode Parameters of a Selective-Electron-Beam-Melted Ti-6Al-4V Alloy. Metals, 9 (2019), 786 DOI: 10.3390/met9070786
  • Schnell, G.; Staehlke, S.; Duenow, U.; Nebe, J.B.; Seitz, H.: Femtosecond Laser Nano/Micro Textured Ti6Al4V Surfaces—Effect on Wetting and MG-63 Cell Adhesion. Materials, 12 (2019), 2210 DOI: 10.3390/ma12132210

2018

  • Mau, R.; Paasche, G.; Lenarz, T.; Seitz, H.: Inkjet printing for localized coating and functionalization of medical devices. Current Directions in Biomedical Engineering, 4 (2018), 233-236 DOI: 10.1515/cdbme-2018-0057
  • Konasch, J.; Riess, A.; Teske, M.; Rekowska, N.; Mau, R.; Eickner, T.; Grabow, N.; Seitz, H.: Novel 3D printing concept for the fabrication of time-controlled drug delivery systems. Current Directions in Biomedical Engineering, 4 (2018), 141-144 DOI: 10.1515/cdbme-2018-0035
  • Rekowska, N.; Arbeiter, D.; Konasch, J.; Riess, A.; Mau, R.; Eickner, T.; Seitz, H.; Grabow, N.; Teske, M.: Thermomechanical properties of PEGDA and its co-polymers. Current Directions in Biomedical Engineering, 4 (2018), 669-672 DOI: 10.1515/cdbme-2018-0161
  • Weißmann, V.; Drescher, P.; Seitz, H.; Hansmann, H.; Bader, R.; Seyfarth, A.; Klinder, A.; Jonitz-Heincke, A.: Effect of build orientation on surface morphology and cell activity of additively manufactured Ti6Al4V specimens. Materials, 11(2018), 915 DOI: 10.3390/ma11060915
  • Cornelsen, M.; Deutsch, C.; Seitz, H.: Influence of Processing Parameters on the Roughness of Electrolytic Plasma Polished Pipe Inner Surfaces. Metals, 8 (2018), 330 DOI: 10.3390/met8050330
  • Schult, M.; Drobek, C.; Seitz, H.: Silicone-based molding technique for optical flow analysis in transparent models of fluidic components. Applied Science, 8 (2018), 512 DOI: 10.3390/app8040512
  • Lieberwirth, C.; Sarhan, M.; Seitz, H.: Mechanical Properties of Stainless Steel Structures Fabricated by Composite Extrusion Modelling. Metals, 8 (2018), 84 DOI:10.3390/met8010084
  • Cornelsen, M.; Deutsch, C.; Seitz, H.: Electrolytic Plasma Polishing of Pipe Inner Surfaces. Metals, 8 (2018), 12 DOI:10.3390/met8010012

2017

  • Cornelsen, M.; Probst, F.; Schwarz, C.; Burian, E.; Tröltsch, M.; Otto, S.; Schieker, M.; Seitz, H.: Mechanical and biological effects of infiltration with biopolymers on 3D printed tricalciumphosphate scaffolds for the reconstruction of critical size defects. Dental Materials Journal, 36 (2017), 553–559 DOI: 10.4012/dmj.2016-306
  • Polley, C.; Mau, R.; Lieberwirth, C.; Stenzel, J.; Vollmar, B.; Seitz, H.: Bioprinting of three dimensional tumor models: a preliminary study using a low cost 3D printer. Current Directions in Biomedical Engineering, 3 (2017), 135-138 DOI:10.1515/cdbme-2017-0028
  • Dethloff, M.; Dangers, M.; Seitz, H.: Numerical flow simulation methods and additive manufacturing methods for the development of a flow optimised design of a novel point-of-care diagnostic device. Current Directions in Biomedical Engineering, 3 (2017), 619-622 DOI:10.1515/cdbme-2017-0129
  • Lieberwirth, C.; Harder, A.; Seitz, H.: Extrusion based additive manufacturing of metals parts. Journal of Mechanics Engineering and Automation, 7 (2017) 79-83 DOI: 10.17265/2159-5275/2017.02.004
  • Weißmann, V.; Drescher, P.; Bader, R.; Seitz, H.; Hansmann, H.; Laufer, N.: Comparison of single Ti6Al4V struts made using selective laser melting and electron beam melting subject to part orientation. Metals, 7 (2017), 91 DOI:10.3390/met7030091
  • Scheef, L.; Nordmeyer-Massner, J.A.; Smith-Collins, A.P.R.; Müller, N.; Stegmann-Woessner, G.; Jankowski, J.; Gieseke, J.; Born, M.; Seitz, H.; Bartmann, P.; Schild, H.H.; Pruessmann, K.P.; Heep, A.; Boecker, H.: Functional Laterality of Task-Evoked Activation in Sensorimotor Cortex of Preterm Infants: An Optimized 3 T fMRI Study Employing a Customized Neonatal Head Coil. PLoS ONE, 12 (2017), e0169392 DOI:10.1371/journal.pone.0169392
  • Beck-Broichsitter, B.E.; Becker, S.T.; Seitz, H.; Wiltfang, J.; Warnke, P.H.: Endocultivation: continuous application of rhBMP-2 via mini-osmotic pumps to induce bone formation at extraskeletal sites. International Journal of Oral and Maxillofacial Surgery, 5 (2017), 655-661 DOI: 10.1016/j.ijom.2017.01.010

2016

  • Heller, M.; Bauer, H.-K.; Goetze, E.; Gielisch, M.; Ozbolat, I.T.; Moncal, K.K.; Rizk, E.; Seitz, H.; Gelinsky, M.; Schröder, H.C.; Wang, X.H.; Müller, W.E.G.; Al-Nawas, B.: Materials and Scaffolds in Medical 3D Printing and Bioprinting in the Context of Bone Regeneration. International Journal of Computerized Dentistry, 19 (2016), 301-321
  • Drescher, P.; Sarhan, M.; Seitz, H.: Investigation of sintering parameters on titanium powder for electron beam melting processing optimization. Materials, 9 (2016), 974 DOI:10.3390/ma9120974
  • Schult, M.; Buckow, E.; Seitz, H.: Experimental studies on 3D printing of barium titanate ceramics for medical applications. Current Directions in Biomedical Engineering, 2 (2016), 95–99 DOI: 10.1515/cdbme-2016-0024
  • Mau, R.; Oldorf, P.; Peters, R.; Seitz, H.: Adjusting inkjet printhead parameters to deposit drugs into micro-sized reservoirs. Current Directions in Biomedical Engineering, 2 (2016), 387-390 DOI: 10.1515/cdbme-2016-0086
  • Pollack, T.; Seitz, H.: Influence of different test gases in a non-destructive 100% quality control system for medical devices. Current Directions in Biomedical Engineering, 2 (2016), 587-591 DOI: 10.1515/cdbme-2016-0130
  • Dethloff, M.; Dangers, M.; Wilmes, B.; Seitz, H.: Flow optimised design of a novel point-of-care diagnostic device for the detection of disease specific biomarkers. Current Directions in Biomedical Engineering, 2 (2016), 685-688 DOI: 10.1515/cdbme-2016-0149
  • Drescher, P.; Witte, K.; Yang, B.; Steuer, R.; Kessler, O.; Burkel, E.; Schick, C.; Seitz, H.: Composites of amorphous and nanocrystalline Zr–Cu–Al–Nb bulk materials synthesized by spark plasma sintering. Journal of Alloys and Compounds. 667 (2016), 109-114; DOI: 10.1016/j.jallcom.2016.01.
  • Breddermann, K.; Drescher, P.; Polzin, C.; Seitz, H.; Paschen, M.: Printed Pressure Housings for Underwater Applications. Ocean Engineering, 113 (2016), 57-63, doi:10.1016/j.oceaneng.2015.12.033
  • Bergemann, C.; Cornelsen, M.; Quade, A.; Laube, T.; Schnabelrauch, M.; Weißmann, V.; Seitz, H.; Nebe, J.B.: 3D printed, polymer stabilized, and surface activated calcium phosphate hybrid scaffolds for in vitro osteoblast cell culture. Material Science and Engineering C, C59 (2016), 514-523; DOI: 10.1016/j.msec.2015.10.048

2015

  • Pollack, T.; Seitz, H.: Analysis of the release kinetics of surface-bound proteins via laser-induced fluorescence. Current Directions in Biomedical Engineering, 1 (2015), 340-344; DOI: 10.1515/CDBME-2015-0084
  • Mau, R.; Kriebel, K.; Lang, H.; Seitz, H.: Inkjet printing of viable human dental follicle stem cells. Current Directions in Biomedical Engineering, 1 (2015), 112-115; DOI: 10.1515/CDBME-2015-0029
  • Dethloff, M.; Dangers, M.; Wilmes, B.; Seitz, H.: Numerical and experimental flow analysis in centifluidic systems for rapid allergy screening tests. Current Directions in Biomedical Engineering, 1 (2015), 437-441; DOI: 10.1515/CDBME-2015-0105
  • Drobek, C.; Mau, R.; Seitz, H.: Tomographic Particle Image Velocimetry of a water-jet for low volume harvesting of fat tissue for regenerative medicine. Current Directions in Biomedical Engineering, 1 (2015), 345-348; DOI: 10.1515/CDBME-2015-0085
  • Klopsch, V.; Germann, T.; Seitz, H.: Numerical simulation of low-pulsation gerotor pumps for use in the pharmaceutical industry and in biomedicine. Current Directions in Biomedical Engineering, 1 (2015), 433-437; DOI: 10.1515/CDBME-2015-0104
  • Drescher, P; Seitz, H.: Processability of an amorphous metal alloy powder by electron beam melting. RTeJournal - Fachforum für Rapid Technologie, 12 (2015); urn:nbn:de:0009-2-42364
  • Spath, S.; Drescher, P.; Seitz, H.: Impact of Particle Size of Ceramic Granule Blends on Mechanical Strength and Porosity of 3D Printed Scaffolds. Materials, 8 (2015), 4720-4732; doi: 10.3390/ma8084720
  • Berger, M.; Probst, F.; Schwartz, C.; Cornelsen, M.; Seitz, H.; Ehrenfeld, M.; Otto, S.: A concept for scaffold-based tissue engineering in alveolar cleft osteoplasty, Journal of Cranio-Maxillo-Facial Surgery, 43 (2015), 830-836; doi: 10.1016/j.jcms.2015.04.023
  • Beck-Broichsitter, B.E.; Becker, S.T.; Seitz, H.; Wiltfang, J.; Warnke, P.H.: Endocultivation: Histomorphological effects of repetitive rhBMP-2 application into prefabricated hydroxyapatite scaffolds at extraskeletal sites. Journal of Cranio-Maxillo-Facial Surgery, 43 (2015), 981-988; doi: 10.1016/j.jcms.2015.03.038
  • Polzin, C.; Günther, D.; Seitz, H.: 3D printing of porous Al2O3 and SiC ceramics. Journal of Ceramic Science and Technology, 2 (2015), 141-146; DOI: 10.4416/JCST2015-00013
  • Bergemann,C.; Duske, K.; Nebe, J.B.; Schöne, A.; Bulnheim, U.; Seitz, H.; Fischer, J.: Microstructured zirconia surfaces modulate osteogenic marker genes in human primary osteoblasts. Journal of Materials Science: Materials in Medicine, 26 (2015), 26; DOI 10.1007/s10856-014-5350-x

2014

  • Vehse, M.; Petersen, S.; Sternberg, K.; Seitz, H.: Drug delivery from poly(ethylene glycol) diacrylate scaffolds produced by DLC-Micro-Stereolithography. Macromolecular Symposia, 346 (2014), 43-47; DOI: 10.1002/masy.201400060
  • Vehse, M.; Lieberwirth, C.; Seitz, H.: (Micro-) Stereolithography based on Diode Laser Curing (DLC) and its Potential Applications in Tissue Engineering. Biomedical Engineering, Volume 59, Issue S1 (2014), S276-S278; DOI 10.1515/bmt-2014-4122
  • Drobek, C.; Seitz, H.: Towards the CFD-based simulation of rigid body movement and shear stress of human cells in fluid flow. Biomedical Engineering, Volume 59, Issue S1 (2014), S921-S924; DOI 10.1515/bmt-2014-5012
  • Drescher, P.; Seitz, H.: Fabrication of scaffolds with different pore sizes using a low-cost 3d printer. Biomedical Engineering, Volume 59, Issue S1 (2014), S1184-S1186; DOI 10.1515/bmt-2014-4533
  • Pollack, T.; Seitz, H.: Experimental Investigations on Medical Devices for the Development of a Non-Destructive Quality Control. Biomedical Engineering, Volume 59, Issue S1 (2014), S1253-S1256; DOI 10.1515/bmt-2014-5016
  • Drescher, P.; Spath, S.; Seitz, H.: Fabrication of biodegradeable, porous scaffolds using a low-cost 3D printer. International Journal of Rapid Manufacturing, 4 (2014), 140-147; DOI: 10.1504/IJRAPIDM.2014.066035
  • Drescher, P.; Reimann, T.; Seitz, H.: Investigation of powder removal of net-structured titanium parts made from electron beam melting. International Journal of Rapid Manufacturing, 4 (2014), 81–89; DOI: 10.1504/IJRAPIDM.2014.066007
  • Drescher, P.; Dangers, M.; Rübenhagen, R.; Seitz, H.: The Effects of various flow velocities on the sensitivity of an ELSIA in a fluid allergy diagnostic device, Point of Care: The Journal of Near-Patient Testing and Technology, 2 (2014), 35-40; doi: 10.1097/POC.0000000000000016
  • Quan, Y.; Drescher, P.; Zhang, F.; Burkel, E.; Seitz, H.: Cellular Ti6Al4V with carbon nanotube-like structures fabricated by selective electron beam melting. Rapid Prototyping Journal, 20 (2014), 541-550; DOI 10.1108/RPJ-05-2013-0050
  • Vehse, M.; Seitz, H.: A new Micro-Stereolithography-System based on Diode Laser Curing (DLC). International Journal of Precision Engineering and Manufacturing, 15 (2014), 2161-2166; DOI: 10.1007/s12541-014-0577-5
  • Polzin, C.; Günther, D.; Ederer, I.; Seitz, H.: 3D-Drucken von Aluminiumoxid- und Siliziumkarbidkeramiken. RTejournal - Forum für Rapid Technologie, 11 (2014); urn:nbn:de:0009-2-39614
  • Hennig, J.; Drescher, P.; Riedl, C.; Schieker, M.; Seitz, H.: A Novel Cell Seeding Chamber for Tissue Engineering and Regenerative Medicine. Processes, 2 (2014), 361-370; doi:10.3390/pr2020361
  • Spath, S.; Seitz, H.: Influence of grain size and grain-size distribution on workability of granules with 3D printing. International Journal of Advanced Manufacturing Technology, 70 (2014), 135-144; DOI 10.1007/s00170-013-5210-8

2013

  • Wieding, J.; Fritsche, A.; Heinl, P.; Koerner, C.; Cornelsen, M.; Seitz, H.; Mittelmeier, W.; Bader, R.: Biomechanical behavior of bone scaffolds made of additive manufactured tricalciumphosphate and titanium under different loading conditions. Journal of Applied Biomaterials and Functional Materials, 3 (2013), 159 - 166; DOI:10.5301/JABFM.2013.10832
  • Schuster, C.; Merschjann, C.; Rothe, N.; Fiedler, S.; Irsig, R.; Meiwes-Broer, K.-H.; Vehse, M.; Seitz, H.; Senz, V.; Sternberg, K.; Lochbrunner, S.: Machining of biocompatible polymers with shaped femtosecond laserpulses. Biomedical Engineering, Volume 58, Issue S1 (2013); DOI: 10.1515/bmt-2013-4085;
  • Fiedler, S.; Irsig, R.; Tiggesbäumker, J.; Schuster, C.; Merschjann, C.; Rothe, N.; Lochbrunner, S.; Vehse, M.; Seitz, H.; Klinkenberg, E.-D.; Meiwes-Broer, K.-H.: Machining of biocompatible ceramics with femtosecond laser pulses. Biomedical Engineering, Volume 58, Issue S1 (2013); DOI 10.1515/bmt-2013-4093
  • Pollack, T.; Seitz, H.: On the Development of a Test Setup for a Non-Destructive Quality Control of Centifluidic Medical Devices. Biomedical Engineering, Volume 58, Issue S1 (2013); DOI 10.1515/bmt-2013-4451
  • Drescher, P.; Wilmes, B.; Dangers, M.; Rübenhagen, R.; Seitz, H.: Comparison of Elisa Sensitivity Relating to Manual and Low-Pressure Loading of the Fluidic Test Device. Biomedical Engineering, Volume 58, Issue S1 (2013); DOI 10.1515/bmt-2013-4152
  • Drobek, C.; Seitz, H.: Simulation of Cell-Laden Flow in a Cell Mixer using Computational Fluid Dynamics. Biomedical Engineering. Volume 58, Issue S1 (2013); DOI 10.1515/bmt-2013-4350
  • Cornelsen, M.; Petersen, S.; Dietsch, K.; Rudolph, A.; Schmitz, K.; Sternberg, K.; Seitz, H.: Infiltration of 3D printed tricalciumphosphate scaffolds with biode-gradable polymers and biomolecules for local drug delivery. Biomedical Engineering. Volume 58, Issue S1 (2013); DOI 10.1515/bmt-2013-4090
  • Spath, S; Seitz, H.: Low-Cost-Herstellung individualisierter Produkte. RTejournal - Forum für Rapid Technologie, 10 (2013); urn:nbn:de:0009-2-38209
  • Vaezi, M.; Seitz, H.; Yang, S.: A review on 3D micro-additive manufacturing technologies. International Journal of Advanced Manufacturing Technology, 67 (2013), 1721-1754; DOI 10.1007/s00170-012-4605-2
  • Polzin, C.; Spath, S.; Seitz, H.: Characterization and evaluation of a PMMA-based 3D printing process. Rapid Prototyping Journal, 19 (2013), 37-43; doi:10.1108/13552541311292718

2012

  • Polzin, C.; Seitz, H.: 3D-Druck von Kunststoff-Medizinprodukten. RTejournal - Forum für Rapid Technologie, 9 (2012); urn:nbn:de:0009-2-34098
  • Becker, S.T.; Bolte, H.; Schünemann, K.; Seitz, H.; Bara, J.J.; Beck-Broichsitter, B.E.; Russo, P.A.J.; Wiltfang, J.; Warnke, P.H.: Endocultivation: the influence of delayed vs. simultaneous application of BMP-2 onto individually formed hydroxyapatite matrices for heterotopic bone induction. International Journal of Oral and Maxillofacial Surgery, 9 (2012), 1153-1160; doi:10.1016/j.ijom.2012.03.031
  • Nebe, J.B.; Cornelsen, M.; Quade, A.; Weissmann, V.; Kunz, F.; Ofe, S.; Schroeder, K.; Finke, B.; Seitz, H.; Bergemann, C.: Osteoblast Behavior in vitro in Porous Calcium Phosphate Composite Scaffolds, Surface Activated with a Cell Adhesive Plasma Polymer Layer. Mater Sci For, 706-709 (2012), 566-571; doi:10.4028/www.scientific.net/MSF.706-709.566
  • Vehse, M.; Gieseke, M.; Fiedler, S.; Petersen, S.; Irsig, R.; Senz, V.; Löbler, M.; Hustedt, M.; Kaierle, S.; Haferkamp, H.; Sternberg, K.; Schmitz, K.-P.; Lochbrunner, S.; Meiwes-Broer, K.-H.; Seitz, H.: Loading method for discrete drug depots on implant surfaces. Biomedical Engineering, Volume 57, Suppl. 1 (2012), 1089-1092; DOI 10.1515/bmt-2012-4006
  • Schuster, C.; Rothe, N.; Svanidze, A.V.; Fiedler, S.; Irsig, R.; Tiggesbäumker, J.; Senz, V.; Vehse, M.; Seitz, H.; Lochbrunner, S.: Material processing with shaped femtosecond laser pulses. Biomedical Engineering, Volume 57, Suppl. 1 (2012), 894-896; DOI 10.1515/bmt-2012-4037
  • Fiedler, S.; Irsig, R.; Gieseke, M.; Vehse, M.; Senz, V.; Oniszczuk, A.W.; Tiggesbäumker, J.; Schuster, C.; Svanidze, A.V.; Rothe, N.; Kaierle, S.; Hustedt, M.; Haferkamp, H.; Sternberg, K.; Schmitz, K.-P.; Seitz, H.; Lochbrunner, S.; Meiwes-Broer, K.-H.: Material Processing with Femtosecond Laser Pulses for Medical Applications. Biomedical Engineering, Volume 57, Suppl. 1 (2012), 603-605; DOI 10.1515/bmt-2012-4405
  • Hennig, J.; Schieker, M.; Seitz, H.: Cell seeding chamber for bone graft substitutes. Biomedical Engineering, Volume 57, Suppl. 1 (2012), 681-684; DOI 10.1515/bmt-2012-4242
  • Löbler, M.; Vehse, M.; Seitz, H.; Schmitz, K-P.: Laser structuring of silica surface improves cell adhesion. Biomedical Engineering, Volume 57, Suppl. 1 (2012), 423-425; DOI 10.1515/bmt-2012-4317
  • Vehse, M.; Löbler, M.; Schmitz, K-P.; Seitz, H.: Laser induced surface structure on stainless steel influences cell viability. Biomedical Engineering, Volume 57, Suppl. 1 (2012), 419-421; DOI 10.1515/bmt-2012-4007
  • Gieseke, M.; Senz, V.; Vehse, M.; Fiedler, S.; Irsig, R.; Hustedt, M.; Sternberg, K.; Nölke, C.; Kaierle, S.; Wesling, V.; Tiggesbäumker, J.; Meiwes-Broer, K.-H.; Seitz, H.; Schmitz, K.-P.; Haferkamp, H.: Additive Manufacturing of Drug Delivery Systems. Biomedical Engineering, Volume 57, Suppl. 1 (2012), 398-401; DOI 10.1515/bmt-2012-4109

vor 2012

  • Jonitz, A.; Wieding, J.; Lochner, K.; Cornelsen, M.; Seitz, H.; Hansmann, D.; Bader, R.: Migration capacity and viability of human primary osteoblasts in synthetic three-dimensional bone scaffolds made of tricalciumphosphate. Materials, 4 (2011), 1249-1259; doi:10.3390/ma4071249
  • Detsch, R.; Schaefer, S.; Deisinger, U.; Ziegler, G.; Seitz, H.; Leukers, B.: In vitro-osteoclastic activity studies on 3D-printed calcium phosphate scaffolds. Journal of Biomaterials Applications, 3 (2011), 359-380; DOI: 10.1177/0885328210373285
  • Warnke, P.H.; Seitz, H.; Warnke, F.; Becker, S.T.; Sivananthan, S.; Sherry, E.; Liu, Q.; Wiltfang, J.; Douglas, T.: Ceramic scaffolds produced by computer-assisted 3D printing and sintering: Characterization and biocompatibility investigations. J Biomed Mater Res Part B: Appl Biomater, 93B (2010), 212–217; DOI: 10.1002/jbm.b.31577
  • Becker, S.T.; Douglas, T.; Acil, Y.; Seitz, H.; Sivananthan, S.; Wiltfang, J.; Warnke, P.H.: Biocompatibility of individually designed scaffolds towards human periosteum for tissue engineering. J Materials Science: Materials in Medicine, 21 (2010), 1255-1262; DOI: 10.1007/s10856-009-3878-y
  • Becker, S.T.; Bolte, H.; Krapf, O.; Seitz, H.; Douglas, T.; Sivananthan, S.; Wiltfang, J.; Sherry, E.; Warnke, P.H.: Endocultivation: 3D printed customized porous scaffolds for heterotopic bone induction. Oral Oncology, 11 (2009), e181-e210; DOI :10.1016/j.oraloncology.2009.07.004
  • Tille, C.; Bens, A.; Seitz, H.: Processing and Mechanical Properties of a New Flexible Acrylic Stereolithographic Resin Family for Engineering and Medical Device Manufacturing. International Journal of Computer Applications in Technology, 36 (2009), 10-15; DOI: 10.1504/IJCAT.2009.026665
  • Seitz, H.; Deisinger, U.; Leukers, B.; Detsch, R.; Ziegler, G.: Different Calcium Phosphate Granules for 3-D Printing of Bone Tissue Engineering Scaffolds. Advanced Engineering Materials, 11 (2009), B41-B46; DOI:10.1002/adem.200800334
  • Drosse, I.; Volkmer, E.; Seitz, S.; Seitz, H.; Zahn, K.; Penzkofer, R.; Matis, U.; Mutschler, W.; Augat, P.; Schieker, M.: Validation of a femoral critical size defect model for orthotopic evaluation of bone healing: A biomechanical, veterinary and trauma surgical perspective. Tissue Engineering Part C: Methods, 14 (2008), 79-88; DOI:10.1089/tec.2007.0234
  • Seitz, H.: Dreidimensionales Drucken von patientenindividuellem Knochenersatz. RTejournal - Forum für Rapid Technologie, 5 (2008); urn:nbn:de:0009-2-15357
  • Bens, A.; Seitz, H.; Bermes, G.; Emons, M.; Pansky, A.; Roitzheim, B.; Tobiasch, E.; Tille, C.: Non-Toxic Flexible Photopolymers for Medical Stereolithography Technology. Rapid Prototyping Journal, 13 (2007), 38-47; DOI: 10.1108/13552540710719208
  • Irsen, S.H.; Leukers, B.; Höckling, C.; Tille, C.; Seitz, H.: Bioceramic Granulates for use in 3D Printing: Process Engineering Aspects. Materialwissenschaft und Werkstofftechnik, 37 (2006), 533-537; DOI: 10.1002/mawe.200600033
  • Schieker, M.; Seitz, H.; Drosse, I.; Seitz, S.; Mutschler, W.: Biomaterials as Scaffold for Bone Tissue Engineering. European Journal of Trauma, 32 (2006), 114-124; DOI: 10.1007/s00068-006-6047-
  • Bens, A.T.; Tille, C.; Bermes, G.; Emons, M.; Seitz, H.: Novel, Biocompatible Polyether(meth)acrylate-based Formulations for Stereolithography – A New Flexible Material Class for Three-Dimensional Applications. e-Polymers, no. 037 (2005), 1-10; DOI: 10.1515/epoly.2005.5.1.377
  • Leukers, L.; Gülkan, H.; Irsen, S.; Milz, S.; Tille, C.; Schieker, M.; Seitz, H.: Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing. J Materials Science: Materials in Medicine, 16 (2005), 1121–1124; DOI: 10.1002/jbm.b.
  • Seitz, H.; Rieder, W.; Irsen, S.; Leukers, B.; Tille, C.: Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering. J Biomed Mater Res Part B: Appl Biomater, 74B (2005), 782–788; DOI: 10.1002/jbm.b.
  • Kovacs, L.; Zimmermann, A.; Wawrzyn, H.; Schwenzer, K.; Seitz, H.; Tille, C.; Papadopulos, N.A.; Kloeppel, M.; Sader, R.; Zeilhofer, H.F.; Biemer, E.: Computer aided surgical reconstruction after complex facial burn injuries – opportunities and limitations. Burns, 31 (2005), 85–91, dx.doi.org/10.1016/j.burns.2004.07.010
  • Leukers, B.; Gülkan, H.; Irsen, S.; Milz, S.; Tille, C.; Seitz, H.; Schieker, M.: Biocompatibility of ceramic scaffolds for bone replacement made by 3D printing. Materialwissenschaft und Werkstofftechnik, 36 (2005), 781–787; DOI: 10.1002/mawe.200500968
  • Seitz, H.; Heinzl, J.: Modelling of a microfluidic device with piezoelectric actuators. Journal of Micromechanics and Microengineering, 14 (2004), 1140-1147; DOI: 10.1088/0960-1317/14/8/004